A Proven Blue Water Cruiser Ready for Adventure

This stunning 1985 Hans Christian 38 MK II Cutter represents the pinnacle of bluewater cruising design and build quality. With a documented history of solo passages and thousands of miles under her keel, Talmid has proven herself capable in any conditions. Her classic Hans Christian lines, elegant canoe stern, and formidable construction make her instantly recognizable—and built to exceed expectations in heavy weather.

What truly sets her apart is her ability to carry full sail when competitors are reefing, combined with the timeless elegance of fine teak woodwork throughout. She's a boat that turns heads in any anchorage while delivering the performance and seaworthiness serious cruisers demand.

The Talmid Experience: Deck to Cabin

On Deck: Your first impression reveals the meticulous care evident in her teak decks.  The teak on the decks and cockpit were entirely replaced in 2014.  Moving forward, the massive bowsprit dominates the foredeck—a signature element of her powerful cutter rig. The cockpit showcases the distinctive Hans Christian profile: exceptionally wide, comfortably seated for hours underway, protected by a custom spray hood that keeps you dry in the roughest conditions. The high combing prevents water from ever reaching the helmsman.

Below Decks: Step into a vessel designed for extended cruising. To port, the fully equipped galley features a gimbaled 3-burner propane stove with oven, top-loading refrigerator/freezer, countertops, and double stainless sink—everything needed to prepare meals in any sea state. To starboard, the first cabin offers a comfortable quarter berth arrangement for guests.

The main saloon invites relaxation with comfortable seating around a substantial table on the port side and a full settee to starboard. The reverse-cycle A/C unit maintains comfort in both scorching summer heat and crisp winter conditions.

Forward: The owner's stateroom features an portside offset island queen berth positioned for comfort and stability underway, with generous storage on the side side. The fully equipped head sits well forward with a separate shower stall and distinct sink area. Just forward of the head lies convenient access to the chain locker.

Propulsion & Systems Ready for the Next Passage

Talmid's heart is a Beta Marine 35 w/ PRM 2.94:1 transmission. new shaft with PSS dripless seals and Sigmadrive coupling. The 35-horsepower diesel provides excellent fuel economy while the direct-drive, 3-blade Max propeller and new shaft with dripless coupling ensure silent, efficient motoring. The engine sits easily accessible beneath the companionway for simple maintenance.

Tankage & Power: Two freshwater tanks provide 170 gallons of capacity, while dual fuel tanks hold 145 gallons of diesel—both thoroughly inspected during the recent engine installation. An 6-gallon hot water tank integrates with both shore power and the engine heating loop. The holding tank (18 gallons) supports extended offshore cruising.

Electrical Systems: Shore power connection (30 amps), Available solar panels, inverter, and ProNautic charger provide flexibility whether you're dockside or at anchor.

Sails & Rigging: Built for Performance

Three professional-grade sails ensure versatility across conditions:

• Mainsail - 3 reef, full batten (MACK Sails) 2018
• Genoa - 110% Jib 8.2 oz. dacron regular cut, has low foot and Sunbrella guard (on Profurl) 2012
• Staysail - hank on - original
• Asymmetrical Blooper
• Whisker Pole - Forespar Mast Mounted  2013
  

Shroud and bow chainplates were replaced in 2015.  Standing rigging and lifelines were replaced in 2018.

Navigation & Seamanship Gear

While retaining an older Raymarine navigation system for reliability, Talmid benefits from modern upgrades: a new Garmin depthsounder (ready for installation), new Garmin wind indicator and panel, and many other upgrades.

Ground Tackle — Extraordinary by Any Standard:

• Primary: 60 lb CQR with 100' of 3/8" chain and  300 ft of 3/4" rode
• Secondary: 45 lb CQR with 300' of  3/8" chain
• Tigress Lufren windlass with gypsy
• Dual anchor rollers with divided locker
• Sea Anchor, Para Tech model 490862

Ready for Your Next Adventure

Talmid represents a rare opportunity: a proven bluewater cruiser with modern systems, classic design, and the structural integrity to handle any ocean condition. The combination of exceptional build quality, documented performance, and thoughtful upgrades makes her an outstanding choice for serious cruisers.

Contact us today to arrange a private viewing and step aboard this remarkable vessel.

Measurements

• Length on Deck: 37' 9"
• Length Overall: 45' 11"
• Beam: 12' 6"
• Draft: 6'
• Displacement: 27,500 lbs
• Ballast: 10,300 lbs
• Mast Height: 56 ft

Sails

• Mainsail - 3 reef, full batten (MACK Sails) 2018
• Genoa - 110% Jib 8.2 oz. dacron regular cut, has low foot and Sunbrella guard (on Profurl) 2012
• Staysail - hank on - original
• Asymmetrical Blooper
• Whisker Pole - Forespar Mast Mounted  2013
• Barient ST Winches Throughout

Propulsion

• Engine: Beta Marine - installed 2022
• Horsepower: 35
• Transmission: PRM 2:94:1
• Alternator: 120 AMP
• New Propeller Shaft
• PSS Dripless Shaft Seal
• Fuel Type: Diesel
• Hours: 10 hrs
• Direct drive, 3-blade Max prop

Tankage

• Freshwater: 2 tanks -- total of 170gals
• Hotwater Tank: Whale Seaward Model S700 - 6 gals tied into shore power and engine
• Fuel: 2 tanks -- total of 145 gals- full inspected at time of engine install.
• Holding Tank: 18 gals

Electrical

• Shore Power: 30 Amps
• PROwatt 115v 250W AC Inverter
• ProMariner ProNautic Charger
• Victron BMV-700 Battery Monitor
• Solar Controller BlueSolar MPPT 100|30

Navigation

• Raymarine plotter
• Garmin GMR Fantom™ 18 Radome 2021 (mounted but not connected)
• Garmin gWind (mounted but not connected)
• Garmin GMI 20 with Garmin GND 10 (new still in the box)
• Airmar DST810 Triducer (installed but not connected)
• Autopilot

Ground Tackle

• Primary: 60 lb CQR with 100' of 3/8" chain and  300 ft of 3/4" rode
  
• Secondary: 45 lb CQR with 300' of  3/8" chain
  
• Tigress Lufren windlass with gypsy
  
• Dual anchor rollers with divided locker

Living

• Two private cabins
• Offset queen berth in owner's stateroom
• Large berth in aft cabin
• Electric Head - Jabsco Model 37010
• Separate shower stall
• Reverse Cycle A/C
• Interior berth cushions memory foam with Sunbrella covers

Galley

• Gimbaled three burner Pincess 3174 propane stove with oven
• Frigoboat Top loading refrigerator/freezer
• Double stainless sink
• Custom built propane storage at helm 2012

Dinghy

• Maker:  Gig Harbor
• Model: Nisqually
• Year: 2011
• LOA: 7' 11"
• Beam: 5'3"
• Oars Included